ALCON BRAKE CLEANER SPRAY (MSDS)
 

ALCON BRAKE CLEANER SPRAY (TDS)
 

High-Impact Brake and Metal Parts Cleaner

A highly effective cleaner for brakes and metal components.

Product Features

• Powerfully cleans brake pads and other brake dust.
• Helps eliminate squeaks and noise.
• Removes dirt, dust, industrial grime, fluids, and oils.
• Cleans grease and contamination from metal parts without leaving residue.
• Suitable for use on hoods, mechanical and hydraulic disks, and cylinders.

Features

• Rapid action.
• Does not cause corrosion.
• Extended nozzle life.
• Easy to apply.

Technical Information

• Appearance: Aerosol
• Odor: Hydrocarbons
• Initial Boiling Point/Range: 63°C - 100°C
• Flash Point: <100°C
• Relative Density: 0.672
• Auto-ignition Temperature: 200°C
• Viscosity: 0.44 mm² @ 40°C

Application Method

• Shake the can before use and spray from approximately 25-30 cm away.
• Wipe after evaporation.
• Can be sprayed in all directions thanks to the special valve.
• Read the label before use.

Warnings

• Do not spray on fire or glowing metal.
• Do not puncture, sand, or burn the can.
• The can is pressurized; keep away from sunlight and store below +50°C.
• Avoid inhaling aerosols.
• Prevent eye contact; rinse immediately with plenty of water and seek medical help.
• Wear protective clothing, gloves, goggles, and masks while working.
• Use only in well-ventilated areas.
• Keep away from ignition sources and do not smoke.
• Do not dispose of in sewage. Dispose of waste and container at hazardous or special waste collection points.